DesignFor T-slot
Based on standardEN 60947-5-2
Symbol00991152
ApprovalRCM trademark c UL us listed (OL)
CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
CE marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions
Certificate issuing authorityUL E232949
Special characteristicsOil resistant
Note on materialsRoHS-compliant Free of halogen
Instructions on usehttps://www.festo.com/Drive-Sensor-Overview
Measured variablePosition
Measuring principleMagneto-resistive
Ambient temperature-40 °C ... 85 °C
Repetition accuracy0.2 mm
Switching outputPNP
Switching element functionN/O contact
Switch-on time≤1.3 ms
Switch-off time≤7.3 ms
Max. switching frequency130 Hz
Max. output current100 mA
Max. output current using mounting kits100 mA
Max. switching capacity DC2.8 W
Max. switching capacity DC using mounting kits2.8 W
Voltage drop<1.5 V
Short circuit current ratingyes
Overload protectionAvailable
Rated operational voltage DC24 V
Operational voltage range DC5 V ... 30 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable
Electrical connection 1, connector systemOpen end
Electrical connection 1, number of connections/cores3
Connection outlet orientationIn-line
Test conditions cableBending strength: to Festo standard Test conditions on request Torsional resistance: > 300,000 cycles, ± 270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm
Cable length2.5 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourgrey
Material cable sheathTPE-U(PUR)
Type of mountingScrew-clamped Insertable in the slot from above
Max. tightening torque0.6 Nm
Mounting positionoptional
Product weight29.1 g
Housing colourBlack
Material housingPA-reinforced High-alloy stainless steel
Switching status indicationYellow LED
Function reserve indicationOrange LED
Ambient temperature with moving cable-20 °C ... 85 °C
Degree of protectionIP65 IP68 IP69K
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesMetals with more than 1% by mass of copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
Cleanroom classClass 4 according to ISO 14644-1
